Cut the plywood will be able to handle and different methods. It is possible to do this manually as well as with electric woodworking tools. As in the slab of plywood glue there, it can affect the fast wear of cutting tools (better, in that case when he was out of solid metal.) You can use laser beams and hydraulic systems. Plywood is easy to cut at a pressure of 3500 bar. When sawing plywood would be correct to produce, involving saws: band or disc.
In order not to split corners, to do sawing across the grain of the plywood (front side) and only secondarily - along. Drill plywood would be better, starting from the front, placing a special list. This will not break down the back side. If plywood is designed for floor, ceiling or wall, the nails will be needed to thread. Fit and screws, cap in which is hidden or depressed. In the long nails should always be in 2, 5-3 times the thickness of the panel. Fasten the plywood panel to be using screws.
Additional holes drilled previously suggested. They should be treated under the screw diameter and be no more than holes in the frame. Can fully apply the glue, screws and rivets to plywood once and for all "stuck" to the design. Before you make installation, you have to prepare plywood. Care must be taken to plate did not change under the influence of moisture and temperature. For these purposes can be between the edge of the frame and panel construction, "pour" elastic filler.
In order not to split corners, to do sawing across the grain of the plywood (front side) and only secondarily - along. Drill plywood would be better, starting from the front, placing a special list. This will not break down the back side. If plywood is designed for floor, ceiling or wall, the nails will be needed to thread. Fit and screws, cap in which is hidden or depressed. In the long nails should always be in 2, 5-3 times the thickness of the panel. Fasten the plywood panel to be using screws.
Additional holes drilled previously suggested. They should be treated under the screw diameter and be no more than holes in the frame. Can fully apply the glue, screws and rivets to plywood once and for all "stuck" to the design. Before you make installation, you have to prepare plywood. Care must be taken to plate did not change under the influence of moisture and temperature. For these purposes can be between the edge of the frame and panel construction, "pour" elastic filler.
